| |
RoentDek PRODUCT LIST 2011
HIGH VOLTAGE
SUPPLIES AND DIGITIZING
ELECTRONICS
|
| |
|
|
|
| |
Product
number
|
Product
Description |
|
| |
312 |
HV2/4: protective 2x4kV-high-voltage-power-supply for MCPs, single width NIM unit. Two individual channels, pos. or neg., up to 4 kV at 3 mA, current and voltage indicator, trip/hold protection for selectable voltage and current limits. Requires SPS2 or a NIM-bin (with ± 6 V) for operation (not included). SHV connection cables not included.
MANUAL |
 |
| |
|
| 148new |
DCA8: 8-channel ampand DC shifting module for fADC range optimization |
| |
|
| 323 |
BA3: battery box for delay line detectors. Provides floating 36V potential difference (saves one power supply channel). |
| |
|
| |
324 |
HVT: active/passive DC adjustmernt box, e.g. for positive MCP front bias settings. |
| |
|
|
 |
| 325 new |
HVZ: passive DC adjustmernt box, for anode and MCP rear bias settings. |
|
|
| 332 |
BIASET3-n: 2-8-channel stand-alone high voltage power supply set with SPS2 mains power adapter (100-250V AC), stand and connection cables for up to four HV2/4 modules, incl. SHV-SHV cables, incl. HVT. Please specify number of channels (n = 2, 4, 6 or 8) and cable length (1 -5m).
|
| |
|
| 365 |
SHV-T: SHV-T-connector for supplying two SHV-inputs from one bias output.
|
| |
|
| 366 |
SHV-G: SHV ground plug for setting detector potential to 0V bias (“ground”)
|
| |
|
|
| |
246 |
HM1-B/Nim: 4-channel histogramming and fast readout TDC with 32MB memory on board for
up to 1 MHz data acquisition rate, based on the ACAM GP1 chip, 133psec least bit, range 11 bit (up to 1.2µs), single hit, input ECL, but incl. passive NIM2ECL converter (121). Readout speed > 100 kHz for “burst mode” (X, Y and TOF, single hit only, 32 bit total). Multi-hit operation (up to 3 hits) with 14 bit range/133-600psec LSB or 300psec LSB/100msec range in single event list mode (> 15kHz read-out speed, please inquire for details). Incl. CoboldPC data acquisition and analysing software. Yields
100 micron position resolution if used with DLD40, 80 micron with DLD80 and 65 micron with DLD120. PC not included.
MANUAL |
 |
| |
| |
121 |
NIM2ECL: passive 8-fold level adapter from NIM signals to ECL-signals. Operates only with "text book" 50Ohm/-2V ECL input units as in the HM1-B. Included in 246. |
| |
|
|
| 122 |
ECL2NIM: passive 8-fold level adapter from ECL-signals (as from DLATR6/8_ECL units) to NIM-signals. |
| |
|
| 190 |
SHV-SHV cable for detector bias, 1-5 m, length (to be defined, default: 4m) |
| |
|
| |
253
|
TDC8HP: 8-channel TDC (PCI-card for 5V slot) based on the CERN HPTDC, <100psec
resolution (nominal least bit 25psec), unlimited range and number of hits with dead-time of <10 ns. Nim-signal inputs, incl. CoboldPC data acquisition and analysing software. Yields < 100 micron position resolution if used with DLD40 and 50 micron with all other DLD/HEX detectors and anodes. Data acquisition speed at least 100kHz to > 1 MHz (CPU dependent). Up to 3 units (in neighboring slots) can be combined. PC not included.
MANUAL
|
|
| |
270 |
fADC4/8: novel readout system for RoentDek delay-line detectors based on a fast 4-fold or
8-fold ADC system and “Soft-CFD” Software.
fADC8 DESCRIPTION SHEET
fADC4 DESCRIPTION SHEET |
| |
|
| |
271 |
fADC4/8b: 10 bit flash ADC system for advanced multi-hit read-out of RoentDek delay-line detectors, N = 1-3 (no. of ADC units), each ADC unit includes 2-8-channel with 1.25-5 GS/s 10 bit ADC for read-out with PC via USB. Includes "Soft-CFD" Software for advanced multi-hit recovery of DLD or HEX detectors. Includes LogX1. Optional DCA8 range adjust module. Optional fast read-out via "optical link". |
 |
| |
|
|
299 |
CoboldPC 2011: comfortable and powerful data-acquisition and analyzing software for multi-parameter experiments, online and offline analysis, for Windows XP/Vista.
MANUAL |
| |
|
|
|
| |
|
Please inquire for Imaging&TOF spectrometers and COLTRIMS spectrometer sytems incl. vacuum vessel / supersonic gas jet target.
 |
|
| |
